- 100% white polyester
- Suitable for sublimation or HTV
*Item is sold BLANK without decoration*
Recommended Settings: Temperature: 390 degrees F; Press time: 1 minute; Pressure: Medium
Recommended Supplies: teflon or scratch paper; repositionable spray; soft paper towels
Layer the heat press from the bottom to the top as follows:
1. teflon sheet or scratch paper
2. 2-3 layers of soft paper towel
3. shoelace
4. sublimation transfer
5. teflon sheet or scratch paper
Steps:
1. Spray the transfer with repositionable spray.
2. Position the substrate onto the transfer.
3. Place the transfer and shoelace in the press onto the paper towel
(transfer on top). Make sure ends of shoelace hang off press (they will melt).
4. Place the teflon sheet or scratch paper over the substrate and transfer.
5. Press the items using the settings listed above.
6. Remove the transfer from the substrate and items from the press
immediately. Use heat resistant gloves if necessary - the items will be very
hot.
7. Allow item to cool before sublimating 2nd side.
